my IP diagnostics

What are the IP addresses of the devices connected to my local network?

For security reasons, a browser (and therefore a website)
cannot simply scan the local network

The easiest way to find the IP addresses of devices connected to a local network is to check the router's software.
To connect to your router, you need to type its local IP address into a browser. Note that the management interface usually requires a password.

Therefore, you need to know the router's IP address. Some methods for Windows, Mac and Ubuntu are described below:



Step 1: Find the local IP of your router
Windows

Method 1 - using Command Prompt
Type CMD in the Windows search tool to find the command prompt launcher.
Type ipconfig in the command prompt and press Enter. Look for the line labeled Default Gateway. The IP address displayed next to this line is that of your router (for example: 192.168.1.1 or 192.168.0.1).

Method 2 - using Windows Settings
Open the Start menu and go to Settings. Click on Network & Internet.
Select Wi-Fi or Ethernet depending on your connection. Click on your network to display its Properties.
Scroll down to find the IPv4 Default Gateway.

Mac

Method 1 - Using shortcut
Hold down the Option (Alt ⌥) key on your keyboard. Click the Wi-Fi icon in the menu bar at the top right of your screen.
Look at the line labeled Router: your router's IP address is displayed there.

Method 2: Via System Settings
If you prefer to use the menus or if you are using a wired (Ethernet) connection: Click the Apple menu in the top left corner, then open System Settings (or System Preferences on older versions).
Click Network in the left column. Select your active connection (Wi-Fi or Ethernet), then click the Details button. Click the TCP/IP tab: your IP address is located on the Router line.

Ubuntu

Method 1 - Via Settings in the Graphical Interface
Click on your connection icon (Wi-Fi or Ethernet) in the top right corner of the screen. Select Settings.
In the left column, click on Network or Wi-Fi. Click on the gear icon ⚙️ next to the name of your active network. A window will open: your router's IP address is displayed on the Default Route line.

Method 2 - Via Terminal
Open the terminal by pressing Ctrl + Alt + T simultaneously, then type the following command and press Enter: grep default
You will see a line like `default via 192.168.1.1 ...`. The address immediately after "via" is that of your router.





Step 2: Connect to the interface of your router

Using your browser, type the local IP of your router.
The router/modem's administration interface typically has a section like this:

Connected Devices - DHCP Clients - Local Network - LAN - DHCP Leases - Connected Devices

Here you'll find the list of connected devices with including following information:

Device Name - Local IP Address - MAC Address



How certain devices bypass limitations

Certain branded products installed on your local network can be detected and listed via an online service.

Typically, these brands implement an announcement system where the device communicates with online services and provides specific local parameters.

Then, when you access the service using your browser, the server correlates the provided parameters and lists the connected products present on your local network.

The case of crypto miners

All miner manufacturers offer tools to list the various machines of their brand installed on your local network. They do not all use the same approach. Most offer small executables to install on your computer; these utilities perform a local scan.

Goldshell

This manufacturer offers an online tool (find.goldshell.com) that relies on a discovery mechanism for Goldshell miners, which communicate (at least intermittently) with their server.








EN | FR